3x11 Ortholinear Keyboard
Description
This is a 3x11 ortholinear keyboard I created. It accepts both plate mount and board mount Cherry MX switches as well as Kailh hot swap sockets. It is not perfect but will print a usable keyboard. Kailh hot swap sockets may need to be glued to the back of the top plate unless they stay in place in the course of soldering. All wiring can be soldered on the printed pieces although some melting may occur if you are too slow. It is held together with M3 machine screws. The bottom plate is designed to hold a Teensy 2.0. All credit to Shipe Design for this mount. https://www.youmagine.com/designs/teensy-2-0-snap-fit-mount It was originaly designed to be printed on a 160x160mm bed so it was split into pieces. I have uploaded STLs for both the full length print and the segmented version. Things to be improved if you want a better fit: Ever so slightly widen the screw head recesses Ever so slightly deepen the screw head recesses You may find others but these are the main issues
Statistics
Likes
9
Downloads
0