Robot 4x4 Car with Arm Arduino Controlled
Description
This is a robotic car with arm controlled by Arduino. Printed with the following settings: 0.3mm layer thickness 1,5mm wall, top and bottom thickness and 20% filling. The parts are assembled using M3 bolts with washer and 2 nuts for the movable part of the arm. The electronics used are: Arduino UNO, L298N H-Bridge and a HC-06 Bluetooth module The power source is: two 18650 3.7V li-ion batteries The motors are: 4 dc motors and 4 sg-90 servos The Arduino code used to control the robot is in the thing file.
Statistics
Likes
15
Downloads
0