Bread Basket "Flower" cnc/laser
Description
This basket is rather a bowl and the design is based on the principle of heat forming of plexi glass. I did use this feature at a few different designs like the ["Waveguide" Bedside Reading Lamp](https://www.zenziwerken.de/en/Lighting/Bedside-Reading-Lamp-Waveguide) or the [Toilet Roll Holder „Clear and Clean“](https://www.zenziwerken.de/en/Household-Items/ToiletRollHolder). You just put the part into the oven and heat it to 170 °C. The duration is depended on the thickness. My estimate is 1 minute per 1 mm material thickness. Keep in mind that the whole 'sheet' will become soft, so sharp bends are better achieved if you use a heat gun. In the case of this bread basket, with it's bend petals, it is the desired effect and I saved my hands from getting burns using oven gloves. I did add a grove in the base to make it easier to get a flat spot. Cutting the plexi glass is not that easy. You got to have a rigid cnc-machine that makes it possible to achieve speeds of more than 3 meters per minute. The cutting depth has to be really shallow, like .5 mm. Otherwise the material will melt and clog the cutter. Use a single flute end mill. Mine had a diameter of 4 mm to make cuts with the required depth. When using a dust collector – which is generally a good idea as the chips are rather messy – make sure to have grounded all the parts of the machine. Static discharge might be the result if not, which can be a problem for the machine. Visit https://www.zenziwerken.de/en/ for more interesting designs. Be aware that no stl will be available for this design as is based on a flat design intended to be bent. You might use a nifty laser cutter to make this design. You just have to come up with an idea how to make a grove in the bottom.
Statistics
Likes
42
Downloads
0