Geeetech I3 pro B Direct Drive mount for E3D V6 with Bulldog extruder and 3D Touch auto bed level sensor
Description
I wanted to place an E3D V6 hotend on my modified Geeetech I3 pro B but couldn't find a model wich hold a fan and the 3DTouch auto bed leveler. So I tried to design my own. It is still under construction, need to draw the nozzle cooling but wanted to try it first without the nozzle cooling. Also I wanted to mount this on the original X axis slider from the Geeetech. Hope you like it and can use it! Feel free to ask for more info. The measurements were taken from a genuine E3D V6! Be aware for that when you using another brand! 11-5-2019 Edited the mount for press in brass M3 inserts. The old version had 3d printed thread for the clamp and the auto bed level sensor. They are now replaced for brass press in inserts else they will wear out to quickly. The old version is still also in the list. Parts: * E3D V6 * Bulldog Extruder * 3D Touch Bed Level Sensor * NEMA17 Stepper motor * M3 Brass inserts
Statistics
Likes
16
Downloads
0