Easter Bunny Springo
Description
I was inspired by [Devin Montes](https://www.youtube.com/channel/UCVc6AHfGw9b2zOE_ZGfmsnw) [(@MakeAnything3D)](https://twitter.com/makeanything3d?lang=en) to create a slingo of my own - an Easter Bunny. It's my first attempt and I've included the Fusion 360 file. You'll notice that the head and body are in two separate parts. I did this mostly for my own convenience during the development process. I've included STLs for the head and body separately, and 1 big STL that includes them both. If you print them separately you can print the head at a low infill. The body should be 100%. If you print the single model, you can use your slicer to change the infill settings of the two areas if you'd like. I did this in Slic3r. There are also STLs for the left and right eye and the nose. I printed these in a different color and they snap into place. You could use a dot of glue, but I didn't find it necessary - especially for the eyes. Here are a couple of short videos showing the bunny: [Cracking apart the layers](https://youtu.be/T-5i651o8sk) [The finished product](https://youtu.be/pBH1jFlEmYo) I've printed this design on a Prusa MK3 and an Ender 3. A friend printed it on a CR-10.
Statistics
Likes
65
Downloads
0