Anet AM8 A8 extruder carriage and mount
Description
• Direct replacement for the original Anet A8 MK8 extruder mount • Extra 1 cm on Z height • 200 grams less than the original mount • Uses original parts • You will also need 2 more M3x18 bolts and 4 M3 nuts (2 nuts are for 5015 fan) • For sensor use another 2 M3x18 bolts with nuts • You will need to lower Your Z axis endstop • Version for 38,3 mm distance between X axis rods (~46mm from center to center) • If you have a problem with inserting the nuts into the mount, you can heat them up with a lighter and they'll fit ok • The fan duct is larger than the A8 original and is efficient enough imo • The "teeth" in the fan duct are just supports and should be removed after print • Use filament type which does not shrink, like PLA, PET, ABS-T. ABS is not recommended • freeCad file included so You can make Your own mods Log 2019-10-21 > 12 mm diameter capacitive sensor mount (Sensor Mount Type 2.stl) 2019-03-17 > minor changes, strenghtening the part with the extruder screw 2019-02-22 > Final version 2019-02-14 > Fan duct 2019-02-10 > Files created, carriage and inductive sensor mount (Sensor Mount Type 1.stl)
Statistics
Likes
75
Downloads
0