5-speed (10T) Jockey Wheel
Description
This is a replacement Jockey Wheel for an older 5-speed drive train. It was modeled specifically for a 1970's Falcon Black Diamond road bike, with a simplex 5-speed drive train, but the wheels should fit other similar 5-speeds. If it fits in the derailleur cage, it'll probably work, these things aren't too particular. The original bushings are needed in order for the wheels to function properly. The wheels have been installed on the bike, and have been in use for commuting for about a month during the Minnesota winter, and have been holding up great, with no visible wear so far. Print Settings: -Pretty much any resolution should work, the ones pictured were printed at 0.2mm. -Concentric patterns for the top and bottom surfaces helps with keeping layer adhesion. -Supports touching the build plate. - ~30% infill, triangle pattern to achieve max. rigidity in radial direction. Post-Printing: Some sanding was needed on the inner diameter to allow for smooth spinning around the bushings, but that was about it.
Statistics
Likes
19
Downloads
0