Multi-Compartment Key-Holder
Description
This is something i've been working on for a long time, It was the reason I initially bought my 3D Printer. I've always hated how pointy my keys were in my front pocket, and how it took me a few seconds to find which key I needed. I wanted to make something to keep them in an organised layout, and solve these issues, but the solutions online, even in the 3D printing community, didn't really do everything I wanted, although [this came close](https://www.thingiverse.com/thing:2859246). I also wanted to have some storage attached, as if i was already going to have a fairly bulky rectangle in my pocket, i didn't mind it being a bit bigger and having a lot more functions. This is the latest iteration of several designs, and the most complicated yet, however it is still a 'work in progress', as i'm planning on adding features and refining the design, but this will be a slow process as I'm very happy with it currently. ###Features - Small multi-purpose box (Designed to hold a folded UK £20 note, plus however many Paracetamol, Ibruprofen, antihistamine and Rennie tablets I can fit. Can also hold anything else small enough though!). - 4mm hex bit / screwdriver holder and socket. - Usb slot (only designed to fit [this USB stick](https://www.amazon.co.uk/gp/product/B00U88FV0S/)). - Latches on the USB slot, and both containers with magnetic ejection for the 4mm hex bit container. - Up to 3 standard keys, but will need modifications or shims to fit most. - (planned) an ultrabright LED torch. - 5x magnets embedded into one face of the keyring to help find screws when dropped on carpet. - Tesco & Sainsburys (supermarkets in England) reward card barcodes, cut and press fit into place. ###Bill of Materials - 3x 4mm [nuts](https://www.screwfix.com/p/easyfix-a2-stainless-steel-hex-nuts-m4-100-pack/8398t) and [bolts](https://www.screwfix.com/p/easyfix-bright-zinc-plated-pan-head-machine-screws-m4-x-20mm-25-pack/5779j) (I bought mine from a local hardware store, so these may not fit exactly, but modifications shouldn't be too hard). - 4x 4mm washers, printed washers probably work great. - 3x [glasses/watch screws](https://www.amazon.co.uk/gp/product/B06XBG8KXR/), I used 2.5x1.4x8.0mm screws. - 2x springs, taken from any generic pen. - 1x [Kingston USB Stick](https://www.amazon.co.uk/gp/product/B00U88FV0S/). - 9x [3mm dia x 2mm thick neodymium magnets](https://www.amazon.co.uk/gp/product/B003BKPIN0).
Statistics
Likes
65
Downloads
0