GPU Vertical Mount - PC Custom Case
Description
I built a custom PC case and relocated the GPU using one of these PCI Express riser cables: https://www.amazon.com/gp/product/B07CS59X7Y/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=islandtimes-20&linkId=eb76f3b2a102489983ac354857e62146&language=en_US (affiliate link) https://www.amazon.com/gp/product/B07CS59X7Y/ref=ppx_yo_dt_b_asin_title_o07__o00_s02?ie=UTF8&psc=1 (regular link) I'm planning on adding a polycarbonate panel to the top of the case, so I designed a mount/bracket for my GPU that will let it hang vertically. I recommend printing the models in the orientation as shown. I did print with supports on the GPU Mount file to keep the print clean, but the GPU Mount End file should print fine without them. I chose to break the design into two pieces to account for any variations in GPU faceplate designs. The two halves are not designed for a press fit, but should line up together when pressed against a panel. You can also do as I did and use glue to secure the two halves together. As a single piece, fit will be tight, but should still work fine.
Statistics
Likes
9
Downloads
0