Valentine's Day Heart with Message
Description
Printed with MonoPrice Mini-Delta -0.2mm Layer Height -Top Layers - 3 -Bottom Layers - 3 -Infill - 10% -Print Speed - 150mm/s -Travel Speed - 75mm/s -Retraction - No -Jerk Control - No -No other experimental/optional settings used Sizes: -There are two sizes for the heart with the message cutout -Smaller is: (X) - 63.5mm (2.5in) (Y) - 63.5mm (2.5in) (Z) - 6.35mm (0.25in) -Larger is: (X) - 63.5mm (2.5in) (Y) - 63.5mm (2.5in) (Z) - 12.86mm (0.50in) Sizes for the smaller double hearts: -(X) - 36.5mm (1.25in) (Y) -25.3mm (1in) (Z) -4.5mm (0.25in) These are the overall dimensions due to the two heart model being a single piece. Not two separate hearts. It Prints as 1 piece. Print Times: -This was using my settings within cura with 150mm/s print speed. -Smaller Heart with Message - Approx. 28-30 minutes -Larger Heart with Message - Approx. 42-45 minutes -Small Two Heart Model (Single Piece) - Approx. 4 minutes
Statistics
Likes
3
Downloads
0