JJRC Q60 / WPL Upgrades
Description
[Update 15-5-2019] I bought some lights for this truck and updated my files to allow for easy instalation/wire management. I redesigned the "Spacer" and the "Servo Tray", which now has 2 versions, for a 9g or a 55g servo; with the 9g one, it's possible to fit a smaller battery in the hood. I also added some new parts which I hadn't required yet, such as the "Front and Rear Bumpers" and the "Double Spacer". [Original Post] I got a JJRC Q60 truck and some WPL upgrades (metal gears and axles) on the internet. Unfortunately, the metal axles aren't a straight swap, so I had to design and print new housings. Then, one thing led to another, and most of my truck is 3D printed! Up to Now: - Front and Rear Axle Housings and Covers; - Spring Suspension; - Steering Servo Tray; - Gearbox Servo Stopper; - Chasis Spacer; - Axle Lifting Mechanism. After re-doing the axle housings I had to redo the suspension, the leafs on the original suspension kept bending and the transmission axle upgrade wouldn't fit properly (had to distance the axles by a few milimeters). Then, I wanted to upgrade the steering servo, maybe I went overkill, but it does the job. Although, to fit the servo I had to remove the cabin seat and floor and I added fittings to attach the cabin to the tray. The screw holes on one of the chasis spacer got stripped, so I made one with tigther holes. In the middle of prototyping this, the truck wouldn't turn properly, I supposed it was for having 2 rear axles, the front wheels would slide sideways. So, I made a mechanism to lift one of the rear axles. I've since realized this problem was due to having the battery placed too much back, but since I already designed this mechanism, I made it available. Next I want to improve these parts, make a cover for the battery that doens't look out of place, and finally, order some lights and design housings for them. As with most my projects, I made no permanent changes to the original parts, so if you wish to go back, it's just a matter of swapping parts. https://youtu.be/TqZIsPAdDnI https://youtu.be/me_efXpOuFU
Statistics
Likes
79
Downloads
0