Profab / Monoprice / Malyan / Prima E3Dv6
Description
UPDATED WITH BETTER CLEARENCE, COOLING AND ZIP TIE HOLDER ABSOLUTE NO OFFSET Now included s3d fw and fff profile for pla I had this awesome printer from profab. I just hated the scattering noise from the cooling fan, and lack of cooling printing pla. tried som of the different design in her, but nothing worked for my printer. I made this little thing up. Wire the exiting fan til constant 12v Wire the new radial fan to the old fan port. in your slicer you have to set the fan for 1 when off, otherwise it will start cooling as the hotend gets hot. Printet in pla, i will later print it en petg , abs or asa. But it works in pla. Easy print with no support of rafts needed, if your printer is calibrated. The biggest bridge is about 32mm. ABSOLUTE NO OFFSET Layer hight 02 Layer width 05 Infill 30% Outlines 2 Top layer 5 Bottom layer 5 PUT IT AS SHOWN ON THE PICTURE FROM S3D If you like me design, please donate my next cup of coffee https://www.paypal.me/rcmn
Statistics
Likes
8
Downloads
0