Soldering Station Enclosure
Description
I designed this enclosure for my T12 style cartridge soldering iron. I tried to make it as small as possible. Internal dimensions are Width 82mm, Length 134mm Height 70mm. There is room for a rotary encoder module, a 128x64 oled display, and a the soldering iron connector is a Hirose RPC1-12RB-6P. The rear connector is a IEC fused and switched with screwholes for mounting. Side note: I cracked two of the 128x64 OLED displays by tightening the retaining screws too much. I've made a change to the model which should prevent any force from being applied to the glass, but it is untested; so if you print this, be careful with installing the display.
Statistics
Likes
3
Downloads
0