TRONXY CONFIG FOR DUET WIFI & BLTOUCH IN HEATER 3 & Titan Extruder, E3d V6 Hot End X5SA V1.1
Description
TronxyX5SA configuration for Bltouch on heater3 on Duet Wifi Running 2.02. This is a work in progress as I work through code I will update the files with the newest version for you pair. This is designed for the beginning conversion between the tronxy and duet with the Bltouch add on. Credit to the creator of the stl file. it wouldn't allow me to upload the configuration unless I included an stl. if you cant Identify yourself I will be happy to tag you because I do not know who made the original file. big update coming soon guys check back around 2/24/19 or 2/25/2019 to see what has changed. Updates list. Macro files plus g code add on for bed control Macro files and g code add on for bl touch (probe up probe down alarm clear) Config.g. update for steppers and extruder for current stepper tronxy is using and shipping out. Working the Bltouch calibration quickly and effectively with simplier instructions that are translatale directly to the corexy. Caliberation details for honing yours in quickly so you dont have to sort through the piles of others problems to figure out yours. Stepper motor direction problems explained and how to fix it in an easy format. ***Update to Bltouch controls and harness on 9 completed 2/22/2019 if you guys need anything or have been running into issues let me know in the comments and i will start working the problem ***Update in the pipeline keep a lookout for it around 3/15 /2019 or 3/16/2019!!!*** *** Updated 4/06/2019 This will accelerate your Tronxy X5S. It is fast!!!*** Update includes: Drivers tuned and accelerated on all axis. Heaters Updated Steps per MM dialed in for true 3:1 ratio. Maximum Speeds adjusted. Acceleration Corrected. Fans Rewritten for full control at all times even after Gcode loading. This has been adjusted for a titan and BMG extruder Add on the Steps per mm are still correct for the factory stepper but the ratio is corrected now for the prior version was very close about 2 MM off of 100 of extrusion and need dialed in
Statistics
Likes
30
Downloads
0