Remix of Mars Exploration Rover (Opportunity and Spirit)

Remix of Mars Exploration Rover (Opportunity and Spirit)

Description

I reorientated all parts, so they should be flat in Cura and ready for printing. If you have any suggestions feel free to comment. I'll try to fix it asap. Also I repaired the tires, which were non-manifold. As for the original you have to print one from all parts. Except for the following: 6x tires, inner wheel, outer wheel and wheel center 2x strut pin 1 and strut pin 2 3x arm knob You can also change colors at the following heights: Solar panels at 1 and 5.2mm Camera array at 6.6mm Small camera at 5.6mm Top mast at 104.6mm Small antenna at 10mm Large antenna at 47 and 133.4mm Sun dial at 1.4mm High gain antenna at 0.6mm All parts need support, except the solar panels.

Statistics

Likes

3

Downloads

0

Category

Vehicles