Universal Figurine Wall Mount (Customizable)
Description
This is a complete redesign of the great Amiibo Wall Mount done by <b><a href="https://www.thingiverse.com/thing:886653">Moddersunited</a></b>. I took the measurements and the overall look of his design to create my own model. This thing is fully customizable. I included versions for Nintendo Amiibo and Disney Infinity. Due to the parametric design and the spreadsheet within the document you should be able to adapt this wall mount to any other figurine type out there with a round base. How to use: To mount them on the wall, the inside of your display or where ever you want to place them, I suggest to use "tesa Powerstrips LARGE". These are 20x50mm. After getting the power strip out, cut along the long side about 4mm to slim it down, so it is 16x50mm. <b>Optional</b>: I don´t like and need the removal grip of these strips, so I cut them. To do so fold the cover paper on both sides back and cut off the handle. Next remove one of the covers and apply the sticker to the universal figurine mount. Press it firm against a table for a few seconds to secure the connection. Only push against the wall mount side and not the ring. Also avoid pressing against the edges where no adhesive tape is to avoid breaking the part. Pressing from inside the ring against a table just works fine. Last step is to remove the second cover from the Powerstrip and push the entire wall mount against the place you want to glue it to. <b>Make sure you have the right side up or you are doomed. :D </b> As always the FreeCAD source file is included. Edit the spreadsheet to adapt the look and size.
Statistics
Likes
39
Downloads
0