XUAV Mini Goose / Snow Goose Parachute Latch Thing
Description
This is a thing I made. The XUAV Mini Goose (aka Snow Goose) has this silly parachute bay on the bottom with no means of securing it in unless you use a servo, so, I made this. There are two options, one has a latch panel suited for a M3 hex nut and the other (my personal preference) is suited for Heat-Set inserts [found here](https://www.mcmaster.com/94180a331). A 10mm M3 screw will also be needed in order to secure the lid to the plane. I use an aluminum one. It is red. Hope this thing helps you get your Goose in the air!
Statistics
Likes
7
Downloads
0