TP Large Roll Extender
Description
This toilet paper holder is intended to allow for oversized toilet paper rolls on a regular size roller. It fits over both ends of a standard size and snaps into the original holder. My original holder has a small end of approx 19 mm and a large end of 23 mm. You will need to print 1 large roller, 1 small roller, and 2 screw-in pegs. If you need to scale the rollers larger, make sure you scale the pegs the same amount. All parts are intended to print without supports, but a plate adhesion is recommended. Print the pegs thread side down. Do not file the pegs. Make sure you insert the pegs from the roller side out. Use a small pillars to fully screw in, but do not over-tighten. Great gift for a spouse or significant other.
Statistics
Likes
28
Downloads
0