Case for the side slot Gotek/floppy adapter
Description
This is the case for the RBSC's side slot adapter module for the Gotek floppy emulator or for external floppy drives. The Yamaha's network module's case was used as the source of this design. The adapter module can be inserted into the side slot of Yamaha MSX computers: YIS805, YIS503 and similar. The case and the bottom cover must be printed separately. Both parts must be printed with Brim and with their open side facing upwards. The model of the front cover is also included. This cover is used to hold the power and floppy interface connectors for the external drives. The side cover must be glued to the case to prevent it falling inside when the interface cable is being attached. Four 3mm x 10mm screws should be used to attach the bottom cover to the case. The adapter's project can be found here: https://github.com/RBSC/SideSlotGotekAdapter If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
7
Downloads
0