3 Wheel X Carriage
Description
3 Wheel X Carriage =============== I had been looking for a new X carriage, after trying several models I could not find one I liked, some were too wide, too heavy etc. It's been kept as simple as possible. ie other than the nuts/bolts/washers for the wheels, and the 3 bolts for the modular hot end mounts, just need 2 bolts and 2 washers, 2 nuts and 1 spring (option) to attach and make the adjuster I made this one. It uses the wheels and parts from the standard x carriage, extras needed are a 16mm m4 bolt, and nut for the hinge, 20mm m4 bolt and nut for the lock with 2 washers and spring for the locking mechanism (this is optional) The hot end mounts are designed to be compatible with (https://www.thingiverse.com/thing:1438795) by thingirob The belt clips come from GT2 Belt Clip by Hagstrom I just can't remember where I got them from. -- Update Added as a remix of (https://www.thingiverse.com/thing:1438795) as I have made it compatible with the mounts here, and the same bed clip Update for the V2 version ----------------------------- 1. The front wheels have been moved in a bit as they were bumping on my custom X motor mount losing me 2mm on the X travel 2. Updated adjuster screw nut pocket to allow for a lock nut, after 50 hours of printing I did not need it but 'Just in case' 3. Updates belt attachments to allow for the belt to be passed down and around to allow for cable ties if you don't want to use the locking method
Statistics
Likes
30
Downloads
0