Anet A8 Y Belt Holder
Description
I meant to upload these last year with The Slab and the X belt holder. I won't update these as I'm done with it. And my motors tend to skip or even not move at all, rather than that the belt goes loose. I'm now busy with a CoreXY printer, so yeah.. So yeah. When you make a X belt holder, you have to make an Y belt holder as well. As both broke last year at the same time. And this one, will not break that easily. I do not know if I also installed the ''secure'' bit. i think I jammed the belts into the holder. I actually remember that I made a mistake whilst installing it, as the belt were not 100% inline with the pulley. But that didn't stop the printer or matter that much. Or I didn't noticed it because I pasted a mirror with thermal paste, Artic-MX2, to my Y bed, which made the Y bed TREMENDOUSLY HEAVY. So That's why I made this! Last year... One last thing, the ANET A8 screw holes are not perfectly aligned!!! Atleast My weren't. Grab a decent screw driver, and use some elbow grease. And a M4 NUT. It's pretty tricky to do this with the heated bed still attached to the Y bed. My fusion 360 file is a mess since I have 4 of these things and a bunch of other stuff and I kinda forgot which I printed out, but these two files were in the STL folder with a unique name.
Statistics
Likes
1
Downloads
0