Dead-blow Hammer
Description
I wanted a large dead-blow hammer. So here is one. Since it is made in parts, structural integrity was the main issue I had, which lead me to give up on doing an entirely printable thingie (and sacrifice my pride). So, hardware is required... 1x threaded rod (1/4in, or 6-7mm) 1x cap nut (and a tap n' die set to match) 2x shotgun shells (target loads, or small game, #6 is what I had) (and boxcutter to open them up FROM THE TOP as far from the brass as possible) Optional: Hockey tape, or rubberizing coat for handle.
Statistics
Likes
32
Downloads
0