HobbyKing Tundra fuselage spacer for candy dropper
Description
Now that I've finally got the [Candy Dropper module](https://hobbyking.com/en_us/h-king-candy-dropper.html?affiliate_code=SZKRHXKVYOFDQDX&_asc=5591873661) for the [Hobbyking Tundra](https://hobbyking.com/en_us/durafly-tundra-1300mm-51-sports-model-w-flaps-pnf-upgrade-version.html?affiliate_code=SZKRHXKVYOFDQDX&_asc=8657658868) I went looking in the box for the foam spacer/packer that would allow it to mount flush to the fuselage. I couldn't find it. I suspect it was never supplied in the box. Anyway, I managed to borrow the same spacer off another Tundra owner and created a copy to the same dimensions. This is the first version (TundraPacker3.stl). In the next version I'll look at tidying up the screw holes and the two rounded corners that are still a bit rough. ---- In the TundraPacker4b.stl version I've increased the size of the screw holes to allow for the plastic that protrudes from the bottom of the candy dropper. When I printed it I had zero top or bottom layers and 1 perimeter. That got the weight down to 11 grams. The original foam packer was only about 2 grams. Flight video https://youtu.be/lpsbyvokjhc
Statistics
Likes
6
Downloads
0