The KillaKwads Conduit Whoop Gate Project
Description
Inspired by a basic square Whoop Gate designed by Luke Turner. This is a range of modular press fit connectors which create Whoop Gates from inexpensive 16mm oval conduit. 16mm oval conduit is cheaply obtained from Screwfix (UK) for less than £1 per 2m length. One hexagonal gate can be constructed from six 300mm length pieces of conduit. One square gate can be constructed from four 500mm length pieces of conduit. Support legs (x2) are recommended at 250mm in length. Varying these measurements would allow the creation of bigger or smaller gates! Many variations are possible, depending on your own imagination. Gates can be assembled with or without leg supports. Three and/or four way connectors can be used to create figure eight gates. A conduit clip with screw holes is included for wall/floor/ceiling/tree mounting any gate. You could even mix and match square and hex corners to create something totally different. The parts are designed with a central gap to allow the seamless installation of LED strips to create illuminated Whoop Gates.
Statistics
Likes
56
Downloads
0