Drill Shelf Pin Jig (Customizable)
Description
This is a customizable Shelf Pin Jig for drilling machines. Default settings are for 5mm pins, 32mm hole-hole and 37mm hole-edge distance (for version with fence). Design is for ball bearings or guide bushings to reenforce and guide the drill path. Can be printed with and without fence. Notes: - Don't set bearing/bushing cut-out diameter too tight. Material my bend - especially on flat (no fence) version. You might need to experiment here. - On use: Requires tight clamping on the workpiece. The drill tends to move the jig. - Don't forget the depth stop when drilling ;-)
Statistics
Likes
182
Downloads
0