Leapfrog Creatr glass plate stabilizer
Description
The Glass Plate On My Leapfrog Creatr Is Able To Slightly Move In The Y-Direction Of The Printer. I Suspected That This Caused Some Y-Direction Deviations In Some Of My Prints. In An Effort To Stabilize The Glass Plate So That It Cannot Move In The Y-Direction (Or X-Direction), I Designed These Clips. There Are Front And Side Versions, And Thin/Thick Ones. I Used Two Thin And One Thick Clip On The Front Of My Creatr. Now The Glass Plate Is Rigidly In Place.
Statistics
Likes
10
Downloads
0