Power hole cover for Atari Falcon / ST
Description
When you replace power supply in Atari ST or Atari Falcon with a picoPSU or something similar that comes with a 5.5mm 12V DC connector, you'll have to put that connector somewhere and you'll be left with a gaping hole where the old power connector used to be. Here's a tiny cover with a hole for the 12V DC connector. This was only tested on one computer and it is a perfect and a very, very tight fit and quite hard to remove. You will not rip it out if you connect or disconnect the new power cable.
Statistics
Likes
3
Downloads
0