MacLatte Pro
Description
(please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs ) This is a Lattepanda Alpha case case, designed to work with the Lattepanda Alpha case case, it is designed look like the Trash can Mac Pro. A user asked me, if I could change one of my designs, to accommodate for the latte panda, and so I did ^^ so If the use case of this, isn't perfect, please note, that I don't know much about the latte panda, or own one myself. * IMPORTANT! - since this case might be to big for some to print out, or just to save fillement that might be used for support, i have made 2 types of files for the top fan grill, shell and frame, where some are split and the others are solid, but those who are split needs to be glued together when assembling the case. - no mather if your choose to print out some of the soild parts, and 1 split, then the case will still fit together, if the split parts are glued together right. - if needed, then sanding the parts can help with fitting it together, all depending on your printers tolerances. - please note that this model might not fit all fans, this case is designed to fit 80x80 PC fan (max hight 25mm). - please use the pictures above, that shows how the glue the split parts together/how to aline them. The Lattepanda Alpha mount can be screw in or glued, to fasten it to the bottom. The idea with this case was also, that this case was supposed to be used with a wireless keyboard an mouse, for the mac like feeling ;) or running a usb cable out through the opening under the iO shield, but the male end of the USB cable might need to be trimmed down to fit, or you can make your own "adapter" :3 if there are any problems, please let me know.
Statistics
Likes
65
Downloads
0