Creality CR 10s Dial Indicator Mount and Storage Mount
Description
Creality CR 10s Dial Indicator Mount and Storage Mount This mount is designed for a Chinese dial indicator with a 9.5mm shaft. The standard indicator back must be replaced with a flat back. I hope the one I made fits your indicator. Knobs are for #10-24 round head bolts. I list 2 types of knobs one with a flat bore sized for taping, and a second with printed threads. I taped mine and have not tried the printed thread, but I have had success printing threads at .1mm layer height. The bolts are threaded into the knobs and a drop of super glue was put on the threads before the head of the bolt was screwed home. Storage mount is attached with bolts and T nuts to side rail and the mount tightens onto it.
Statistics
Likes
7
Downloads
0