Nixie Tube Thermometer stand NT2RA
Description
Found a really awesome electronics kit on ebay using the IN-14 nixie tubes as a temperature display along with a bar graph nixie tube. The seller is tortugascuba and the listing was Nixie Thermometer Kit - Tubeless - 12VDC - PCB w/ Parts (No nixie, nor bargraph) . I was able to source the required tubes from US based ebay sellers. I need a display stand so I came up with this in fusion. I printed the parts out and attached the PLA bar graph mount pieces onto the front with 3D Gloop PLA glue. Super glue would also work great for the PLA parts. To keep the bar graph tube in place I used a little elmers glue all around were the glass and PLA touch . Then used a little black acrylic paint to hit the tops of the raised letters on the stand. The stand offs are sized for m3 screws. I had to run a m3 tap threw the stand offs to get the screws started. Be careful not to run the tap too deep and threw the other side. EnJoy
Statistics
Likes
6
Downloads
0