K40 Smoke Assist for 50mm fan
Description
This is a magnetic fan mount for a K40 laser engraver / cutter. For each fan, you'll need: * 3mm plywood * 50mm fan, 40mm between the center of the bolt holes * 2 to 4 #6 machine bolts, 3/4" long * 2 to 4 #6 nuts * 1 9.5mm magnet * Tape * Wood glue Assembly: 1. Cut out the wood parts from the plywood 1. Assembly the wood parts with wood glue 1. Put tape across the bottom of the base 1. Drop the magnet in the hole, sticking it to the tape 1. Place the fan in the wooden mount (look at the pictures) 1. Secure the fan with the bolts and nuts. I have 3 of these fans in the front of the machine. They blow the smoke to the back toward the vent. This clears the smoke, which helps keep the soot off of your material and keeps smoke out of the beam, making the laser a little more powerful.
Statistics
Likes
12
Downloads
0