Toyzuki Front Bumper and Battery/Servo Platform
Description
Toyzuki V2 Chassis This rotates the front steering servo 90 degrees so that I could use small 1300-1800mAh batteries in the front tray. Found a few batteries on ebay just look for ones less then 70mm long. My batteries are 3s but you could probably find 4s as well. I also included a front bumper that is not really height adjustable so it may not work for your body. Also the stock bumper mount wont work with this so.... 7 inch Velcro straps hold the battery down. I have slightly modified my front Spur gear shaft but i think this will still work for everyone on the V2 chassis (shaft modifications found here http://www.rccrawler.com/forum/axial-scx10-ii/605156-toyzuki-v2-topshaft-slipper-alternative.html ) Update: I added a second file so you can adjust the bumper down lower but it wont be mounted as well since it will only be held in with 2 screws, but possibly it will work fine. The diameter of the bumper screw heads is 5.5mm so possibly you can fit LEDs in there and have some fog lights.
Statistics
Likes
22
Downloads
0