Bed Leveling Switch on Nozzle
Description
Personal project in order to achieve auto-bed-leveling directly from the nozzle. 2 extra holes must be drilled on the mounting plate, use 6mm drill, clearance is important. Additional hardware: 7x M3 nuts 2x M3 20mm screws 1x M3 22mm screw 2x M2 10mm screws 4x M3 12mm screws 2x Diam. 06mm Length 09mm squared & grounded springs I used the stock Micro-Switch and the 2x M2 nuts from the z-axis endstop and the 4x M3 08mm from the mounting of the extruder.
Statistics
Likes
39
Downloads
0