Daruma Otoshi - Japanese Traditional Toy
Description
This is a model of a traditional Japanese kid's toy. The Daruma doll is stacked on top of five of five pieces, and players use a small hammer and take it in turns trying to hit the bottom piece of the stack out without knocking over the whole thing. Here's a video that probably explains it better... https://www.youtube.com/watch?v=G0UbuQJ4mNQ All six main game parts have a vertical hole running through the middle, meaning you can display this stacked with the hammer running through the hole, holding everything in place. Parts (7) ==== top.stl -------- Go for a decent infill with this one, you want it to weight about 30g. It's important the bottom surface is nice and smooth, give it a sand just to be safe. I'd also recommend painting the face black and red as illustrated on the render. piece x5.stl --------------- Print five of these! You want these weighing around 12- 15g, 30% infill was sufficient for me. Smooth top and bottom surfaces are key, you might want to give them a good bit of sanding, I'd also highly recommend painting them different colours! hammer - head.stl ------------------------ This is probably going to see a fair bit of action, so I'd again give it some good infill so it doesn't break quickly. hammer - handle.stl -------------------------- I don't recommend printing this, but including it here just in case you're crazy enough! A much better alternative would be a piece of 5mm dowel, around 160mm length.
Statistics
Likes
16
Downloads
0