Raspberry Pi Stand
Description
As soon as I saw Adafruit's Raspberry Pi Zero Stand (here: https://www.thingiverse.com/thing:3424130 ) I had to make my own for the Zeros' big brothers. I ended up getting pretty close from memory, the angle being slightly more acute compared to the Pi Zero stand. Made sure there was plenty of space for the USB ports and cables. The routing hole on the bottom is at least wide enough to let the HDMI cable I had on hand to pass through; however, bending the cable was bit of a pain. Mounting holes match the diameter of the Pi's, checked the Mechanical Drawings page on Raspberry Pi's website here: https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/README.md I also added a notch for adding and removing the microSD card, just for convience. -- **UPDATE March 27, 2019** Added in a version without text, as well as shortened width versions to better fit the Model B+ and A+ boards.
Statistics
Likes
10
Downloads
0