EOS2 Mobula7 canopy (should fit any "whoop" style quad)
Description
I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one. I did design this so that the screws with the big heads that come with the Mobula7 replacement FC and the UR65 fit this canopy. lol it seems like I get better and better with each new canopy I design. WARNING!!! I do use the HappyModel Whoop VTX so I did not have to really worry about the VTX fitting so if you are using a different type of VTX it may have space limitation issues, it SHOULD work just fine with a beta6/75x vtx to use with the EOS2. In the picture where there is a red canopy and a clear canopy the red one is printed in PETG the clear one is TPU. It comes in at 2.8 grams. I print at 0.1mm layer height, infill doesn't matter as it is just 2 perimeters, and support. If printing TPU then turn off retraction, TPU doesn't really like retractions being on. Have fun and happy flying.
Statistics
Likes
128
Downloads
0