Infill 3D 75 Geared Extruder
Description
As I Mention In The Infill 3D Bowden Geared Extruder, I Like Direct Drives I Will Go As Far And Say That Aesthetically Direct Drives Are Ahead; Less Parts, Smaller, Less Complicated But At The Price Of Reliability. Once More I Wanted A Compact Extruder That Has The Reliability Of A Wade'S Extruder Here Is What I Came Up With. I Made This Extruder To Work With The Sunburn Hotend And The Infill 3D I3R However It Will Work With Any Hotend That Has A 16Mm Groove Mount, I Wanted The Extruder To Be Small And Give Me Back Some Z Axis Printing Volume; From The Bottom Of The X-Carriage To The Tip Of The Sunburn Hotend (This Measurement Will Be Different With Other Hotends) There Is Only 10Mm+/- I Could Have Gone Lower But I Wanted To Play It Safe. Also It Uses The Same Small 2/3 Herringbone Gears As My Bowden Extruder Making It Very Compact, Check The Pictures One Of Them Has A Quarter Dollar Coin For Refrerence, I Have Been Using It For The Past Few Months And Is Been Performing Well. Latest Version And X-Carriage Is At Http://Infill3D.Com/20-Downloads Along With Other Parts That Might Interest Prusa I3 Users. If You Find Any Errors Or Have Any Ideas For Improvement Let Me Know.
Statistics
Likes
780
Downloads
0