Dry Box Filament Roll Holder
Description
Ok another filament roll holder for dry box. Wanted to try and make a roll holder that can be fixed to the inside of a sealed plastic food container and add some pneumatic air fittings and PE tube. Then i can fill the bottom of the container with plenty of desiccant packs. Just learned that you can recharge them by putting them in the oven. Here you will need: The printed parts. Washers, knobs and flanges are 2 of. 2 of M10 nuts. 2 of M10X100 full thread bolt. 2 of 26mm OD 10mm ID x 8mm ball bearings. 4 of 4mm X 10 self tapping screws. Use superglue to secure nuts and bolts to the corresponding parts. Use some sealant where air can get thru around holes. Use extra knob for lock nut. This can be mounted to anything and its got a big base so if you want you can glue it to something then don't print the backing. https://a360.co/2EoJF2h
Statistics
Likes
6
Downloads
0