Vidroc 808 BT-50 & 60 Nose Cone
Description
Vidroc 808 BT-50 and BT-60 Nose Cone This design makes it fairly simple to add an 808 Camera to your BT-50 or BT-60 based rocket. - The BT-50 version It takes advantage of the narrow body of the 808 and records the flight 'sideways'. The single hole version is for cameras that can record on power-up. The long hole version is for cameras that require two different buttons to be pushed to start recording. I've tested this with a number of different 808 cameras and the fit is good, but I primarily designed it for the MateCam 808. Features - 2mm hole in the tip for hanging the camera looking down during recovery. - Slot in the nose cone shoulder so you can run the nose tip shroud line into the airframe When I print it, I put supports across the upper openings but you may be able to print it without doing that. <h> For the BT-60 you need to add supports for the camera mount base and will need a RC servo mounting screw to retain the camera in the mount. <img src="https://cdn.thingiverse.com/renders/68/ef/f7/bd/16/9e7e387aee79d546699b929dd26b31a3_preview_featured.JPG">
Statistics
Likes
9
Downloads
0