Camera Module 38x38mm Housing and improved tripod stand
Description
#Housing with tripod stand for a 38x38mm USB camera module such as [this one](https://www.amazon.de/gp/product/B07J1LM6J2/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1). The front cover has one 15mm hole for the optic and six 6mm holes for light LEDs (2 rows of 3 LEDs). On one side of the back cover, there is a notch for a sliding switch, to turn the light ON and OFF. The tripod is 9cm high and allows you to adjust the height and vertical angle of the camera. I use it to keep an eye on my 3D printer via Octoprint. I added the LEDs and the switch myself on the camera module. If someone is interested to remove the LED holes and switch notch, let me know! I can do it and publish it in no time ;) ##Parts: - 1x Front cover - 1x Back cover - 1x Leg nut - 1x Leg bolt - 1x Leg middle - 1x Spacer - 3x foot - 5x M3 nut - 2x M3x25mm bolt - 3x M3x8mm bolt - 4x M2x16mm bolt - 2x M2x4mm bolt for the switch - 3x round rubber pad 10mm diameter
Statistics
Likes
1
Downloads
0