Geeetech A10 BLTouch Mount (stiff, aligned and fixated)
Description
Inspired by [BennyBoyW's](https://www.thingiverse.com/BennyBoyW/) [Geeetech A10 BLTouch Mount](https://www.thingiverse.com/thing:3116244) I wanted to be safe from my clumsy moves and create a stiff version which is aligned in a well-defined way, so that the BLTouch always stays in position, almost no matter how hard I hit it accidentally and frequently :-) As you can see I have connected it directly to Geeetech's [Extension Board](https://www.aliexpress.com/item/Geeetech-Extension-Board-for-A10-A10M-A20-A20M-3D-Printers/32961854811.html) using the [Extension Board Mounting Plate](https://www.thingiverse.com/thing:3166512) As a goodie I've added a few holes for the cable. ### By design your config for Marlin should be: `#define X_PROBE_OFFSET_FROM_EXTRUDER 0` `#define Y_PROBE_OFFSET_FROM_EXTRUDER -33` `#define Z_PROBE_OFFSET_FROM_EXTRUDER -1` Of course, this can vary depending on your sensor and printer, but you can simply adjust these variables in the OpenSCAD source file: * `front_plate_z` for the z-position of the sensor from the top * `sensor_dist_from_nozzle` for the y-offset.
Statistics
Likes
31
Downloads
0