Rigid Carriage Y for HyperCube Evolution
Description
The main goal is to obtain the most rigid sealing of the X axes. The second goal is the most rigid fixation of the Y-axis bearings. To date, only one part has been printed to check dimensions. This carriage has not yet been installed on any printer. I create a carriage with the following parameters: Diameter Y-axe = 10 mm. Fastening the cover of the axis Y = DIN 912 M3x55, 4 pieces. Mounting bearings Y axis = 55 mm (2xLM10UU or 1xLM10LUU). The diameter of the bearing channel Y = 18.6 (for subsequent machining). The diameter of the axes X = 8mm. Mount axis X = DIN931 M3x16 2 pieces + DIN912 M3x12 2 pieces. The diameter of the channels of the axes X = 7.6 (for subsequent machining). Roller axis smooth rod with a diameter of 5mm. The diameter of the channel axis of the rollers = 4.6 mm (for subsequent machining). The endstop X is angled, clued on the carriage. The STL file for endstop X is attached to the project, but it will be better to interrupt the infrared rays if you make it from a piece of aluminum or iron. The endstop Y should also be glued to the carriage Y. I use compact endstop for the Y-axis ( https://www.thingiverse.com/thing:3236443 ), I am very pleased, and I am going to continue using it, sticking a flag on the carriage or on the bearing cover.
Statistics
Likes
8
Downloads
0