Pi0 and Pi3 B+ Din Mounts - No Supports Needed
Description
Din mounts for the Raspberry Pi0(W) and Pi 3 B+ (this should work with 3A+, 3 B and +B models) On the bottom of the Pi0 there are 2 power pads under the micro usb power input, you can solder header pins to them and power the pi that way. I've included "Pi0_Din_5V_hole" for this reason. If you are powering the Pi0 with a micro usb cable, use "Pi0_Din_No_hole". (I will be adding the same thing for the Pi3 B+ in the future)
Statistics
Likes
4
Downloads
0