Raspberry Pi Touch Display enclosure
Description
Enclosure for Raspberry Pi Touch Display and some other hardware ;) Hardware i use for my ButtonBox: * [Raspberry Pi 3 A+](https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/) * [Official 7" Raspberry Pi Touch Display](https://www.raspberrypi.org/products/raspberry-pi-touch-display/) * [Adafruit I2S Stereo Speaker Bonnet](https://www.adafruit.com/product/3346) + [3W Speaker](https://www.adafruit.com/product/1669) * [Teensy LC](https://www.pjrc.com/teensy/teensyLC.html) (USB HID Gateway) * [Neuftech CC1101 Wireless Module](https://www.amazon.co.uk/dp/B01CI01F94/ref=cm_sw_em_r_mt_dp_U_.UmFCbTJ3JH2X) (Wireless Sensor Gateway) * [DS3231 RTC module](https://www.amazon.de/dp/B01M2B7HQB/ref=cm_sw_em_r_mt_dp_U_PHtNCb0F2TNAF) * [UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output](https://www.adafruit.com/product/1385) with 2.1mm DC barrel jack * 7V Power Supply with 2.1mm DC power jack Hardware you also need: * M3x10mm countersunk head screw (14 pcs; Speaker, IOShield, Lid) * M3x6mm screw (4 pcs; Frame) * M3 screw nut (8 pcs; Speaker) Tools you need: * screwdriver * cutter * rasp * M3 thread cutter **You maybe have to enable shrink compensation**
Statistics
Likes
23
Downloads
0