Unipod
Description
This is the newest revision of the pod for my custom drone racing frame. After almost 1 year of experimenting, it seems as though TPU is the most successful material to use for drone racing. The pod has been redesigned from scratch to stay rigid, light and nearly unbreakable using TPU with 25% infill. Follow my print instructions for best results. --- *** UNIPOD Camera: The pod will fit a foxeer predator, runcam swift miro, caddx micro. Pretty much any micro will fit. VTX Antenna: There is an integrated mount inside the canopy for a standard vtx antenna. The pod is designed to house an axii vtx antenna or any other stubby / compact size antennas Shark Fin: The tall fin is for turtle mode / quopa. The adjusted height should allow you to turtle out of tall grass. Frame Mount: The 4 corners are designed specifically to mount only on my custom frame. It will not fit on the merica, floss, ghost, etc. If you are interested in trying my racing frame or would like this pod to fit your frame, please send me a message. *** UNIPOD GP / FB These versions have integrated cases for GoPro Session or Foxeer Box. If you would like a custom angle or camera mount for your HD camera, send me a message. *** RX_VTX To keep things tidy, use the rx & vtx cradle. This is made to fit on a standard 30.5 x 30.5 mount. The cradle is designed to hold a tbs unify pro & a frsky RXSR. If you would like a custom one for your rx & vtx combo, message me. *** M3 SPACERS Nylon plastic nuts break all the time and can be cumbersome to work with. These spacers will be a snug fit over your m3 bolts. The TPU material is grippy enough to keep all your electronics in place. *** ANTENNA TAG 90 degree angled antenna holders that clamp on to the fin. I plan to use this also add a tag on this model for identifying my different race quads in the near future *** *** Layering Sequence From The Ground Up Bottom plate 4 x 5mm spacers 4in1 ESC 4 x 2.5mm spacers Top Plate 4 x 2.5mm spacers FC RX_VTX Cradle 4 x nylon nuts (optional) *** CHANGE LOG *** 09/20/19 -- updated pod for unipod, merica & frog frames -- each pod comes with a GP40 & FB40 variant, these are for "go pro" & "foxeer box" both are at 40 degree angles 09/19/19 -- uploaded gopro session mount with 40 degree angle 03/03/19 -- updated m3 spacers to v03.05, thicker supports at bottom for easy peeling off build plate -- added antenna holder that clamps on to the fin, 03/10/19 -- added pod for transtek frog. unipod_v03.05.unipod_transtek_frog.stl 03/29/19 -- added v3.08 updated files. -- thicker base on fin -- adjusted rx antenna holder to fit new fin, improved bolt pattern -- added lens angle markers from 0-90 degrees
Statistics
Likes
42
Downloads
0