PyPortal Case
Description
3D print a case for the Adafruit PyPortal! Build a portable IoT project using Adafruit's PyPortal and PowerBoost. Get started with circuit python and program hardware with a touch screen display! The enclosure features snap fit covers and a bracket for securing all the components. Secure the PCBs to the 3D printed case with machine screws. The back cover snap fits and features a spot for a bigger speaker. There’s also a nice cut out for the micro SD card slot. You can use a toggle switch to power the device on and off. You can also recharge the lipo battery over USB. The face plates can be swapped out so you can build a custom keypad. https://youtu.be/KYEBMq09bWA Learn guide, documentation, code: https://learn.adafruit.com/pyportal-case/ https://learn.adafruit.com/adafruit-pyportal Get Adafruit PyPortal https://adafru.it/4116 Adafruit PowerBoost 1000C https://www.adafruit.com/product/2465 Mini Oval Battery https://www.adafruit.com/product/3923 1200mAh lipo battery https://www.adafruit.com/product/258 Panel Mounted Switch https://www.adafruit.com/product/3221
Statistics
Likes
123
Downloads
0