DIY Head Tracker Case for Side Mounted Assembly
Description
***Update 2/19/21*** Added DYS headtracker case for FSBUDDY. Fsbuddy is a freely available model from ImmersionRC designed to mount a powerplay DVR to a top center strap for a fatshark goggle. I have added a new design of my DIY headtracker case which clips onto the FSBUDDY model (see photo) for a simple mounting solution. The original case was just a box which you had to design mounting for. The original lid for the case is still used. If you own the powerplay dvr, you already have the FSBUDDY and won't need to print it. End update+++++++++++++++ This is a case for the DIY head tracker found here: https://www.rcgroups.com/forums/showthread.php?1677559-DIY-Headtracker-%28Easy-build-No-drift-OpenSource%29 Specifically this case is for the side mounted soldered assembly style. (see picture of different assembly styles on the first page of the thread linked above). I used a real arduino nano, with all pins pre installed. A SMAKN GY-85. I am using a readymaderc crimp female servo connector for power and ppm to the radio. And the reset button I used can be found here: https://www.amazon.com/gp/product/B0752RMB7Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Print with 30% infill and .5mm extrusion width. Case dimensions are 48.4 long by 37 wide by 24.8 high. Reset button protrudes 11mm outside case end. Cover snaps on.
Statistics
Likes
13
Downloads
0