Hirobo SDX HAL sensor mount
Description
This is a nitro engine (HAL) sensor mount for Hirobo SDX RC helicopter. The sensor I had came from an RcExcel ignition kit. Works well for telemetry too. The sensor itself is 4mm wide, and the cable was fi 3mm, hence the enlarged hole in the base. I hot glued and shrink wrapped my sensor to make sure it would not get loose and hit the fast moving magnet. Some hot air induced bending was also used for adjusting sensor to magnet distance, but if you have a fitting magnet that sits flush with the fan surface (unlike me) it should be a perfect fit with no additional work needed.
Statistics
Likes
2
Downloads
0