Hotbed Glass Corner Holder With Position Adjuster - Full set for Anet A8 A6

Description

Best corner set for holding >=3mm glass plate on the Anet A8 / A6 hotbed. My recommendation is 4mm thick glass plate. Design based on excellent design by thfo and 3DMaka. Why the set was created =================== I used both attributed designs, however my glass plate was not perfectly cut, therefore it had some loose. Temporary fix was to use a clamp to hold it in place. Then I decided to do the modification so the imperfect plates can be still used without additional accessories. I have included my modification as well original booties and corner designs to make an easy to use set. If you like the design please tip thfo and 3DMaka not me. Key features ========== - reuse of original springs and screws - keeps springs in place from the bottom and top - hold firmly glass on the hotbed - make it easier to level the plate - corners level or are lower then the glass plate so the extruder does not block on them What you need to print ================= To have full set please print - 4 x booties - SpringBushing.stl - 3 x corners - Anet_A6_Glass_Bed_Corner_Holder_V2.stl - 1 x corner with position adjuster - Anet_A6_Glass_Bed_Corner_Holder_With_Springs.stl If your glass is off more then 2mm then print more corners with position adjuster.

Statistics

Category

Tags