Prusa i3 MK3 Memory and Tool Holder
Description
**UPDATED:** emancarrillo discovered that the bottom of the main piece wasn't flat. I've fixed the issue and re-uploaded as "Prusa_i3_MK3_Tool_Holder-Main_Fixed.stl". I verified in Slic3R that the first layer is now flat and encompasses the entire model. ** End Update** I found Premolo1993's SD holder for the Prusa MK3 (https://www.thingiverse.com/thing:3236372) and loved the idea of a holder that clips to the frame from behind and above the power supply. But I wanted it to also hold some tools such as a pair of pliers, flush cutters, etc. I then remembered eburgess4's Monoprice MP Select Mini Tool/Bracket holder (https://www.thingiverse.com/thing:1688459) that I printed and used for my Select Mini. It's a rail system with various slotted tool holders that can be put in and taken out easily. However the main bracket is screwed into the Select Mini. I combined modified parts of the two models above, expanded the SD holder area to hold both SD and micro SD cards, and added a general items holding area. The rail sits on top the side of the main body with a French cleat system. It's recommended that you glue it in place because of the weight of some tools will pop it off the slick PLA surface. Simply print the desired tool holders from eburgess4's model and slot into the side of the rail as shown. The whole print head/extruder assembly when printing on the far right near the top by the holder clears it by about 2 mm.
Statistics
Likes
9
Downloads
0